Fulcrum One Yoke Pre-Orders Open

A new yoke which has been in development for multiple years has now just been made available to pre-order. The Fulcrum One Yoke is designed to be a modern yoke using Hall Effect sensors to give eliminate spiking and wear that can happen overtime. The yoke will also feature a unique connection method so that yoke handles can easily be swapped out in the future when additional aircraft types are made available.

The British made product has been delayed due to ongoing production issues because of the COVID-19 pandemic, but the team expect to be able to start shipping within the next four weeks. Because the quantity made available at release will be lesser than what Fulcrum hoped for, they have opted to create a registration list which will be based on first-come, first-served. Money won’t be taken until the order is ready to ship, but securing your place on the list will help to make sure you get yours quicker.

A pre-order page is a simple form, which you can access here.

The Fulcrum One Yoke is due to release to those on the waiting list in Mid-September and will cost £360 (+VAT). The company ships worldwide.


Read More

Fulcrum Simulations Relocates Manufacturing to the UK

Screenshot 2020 03 24 Products – Fulcrum Sim
Fulcrum Simulations, designers of the upcoming Fulcrum Yoke, has indicated on their website they had relocated the production of their electronic boards back to the UK. While no precision has been made on the original location, Fulcrum hopes that this moves will enable them to have more control over their production lines. The shipment dates are currently unknown, however Fulcrum
Read More

Honeycomb Alpha Flight Controls: The FSElite Review

ALPHA Flight Controls
Affordable hardware within Flight Simulation has been at the forefront of many simmers' minds for a long while. We have been stuck with the same hardware for many years. Despite the reliability, it’s been a long time coming for a new player. At long last, Honeycomb Aeronautical stepped up to the job with their new Alpha Yoke system. Not only
Read More

Virtual-Fly Release the Yoko the Yoke PLUS

YOKO PLUS Is Here The BEST Flight Sim Yoke In The Simulation Market. Still A YOKO.
Virtual-Fly, the team behind products such as the RUDDO rudder pedals and also the TQ-6 throttle set, has released their brand new yoke. Listening to customer feedback from their original Yoko the Yoke, the Yoko PLUS builds upon it adding a range of new features and functionality. The most obvious new feature is the brand new 8-way hat switch. I suggested
Read More

Honeycomb Aeronautical Preview Upcoming Alpha Flight Controls Yoke

50924384 752893351751066 7443396869083889664 O
Honeycomb Aeronautical, a company that is currently developing an all-new yoke and throttle solution for the simulation market, has released updated previews of their soon to be released Alpha Flight Yoke and its companion heavy dual mounting system. This system will help keep the yoke in place when in use better than previous mounting methods, and should ensure a smoother
Read More

Virtual-Fly Yoko the Yoke: The FSElite Review


Product Information
Purchase From
Version Reviewed
Press Copy Provided By
FSElite's preferred Flight Sim vendor is SimMarket. (Why?)

As per our Community Charter, all of our reviews are free from bias, prejudice and favouritism. Don't forget, each reviewer has their own style and thoughts, although they all abide by the Review Guidelines - something I suggest you read.

Spanish-based flight simulator hardware developer Virtual-Fly has been producing high-quality hardware for many years, including throttles, rudder pedals and their full-cockpit sim set-ups. It’s no surprise that they have built up a huge following of loyal and supportive customers over the years. FSElite has been following the team for a while and we were delighted that they asked us to review various pieces of their equipment from their range of products. As someone who is just getting into serious flight simming hardware, I was thrilled to be able to get a retail build of their Yoko the Yoke. In this review, I’ll tell you everything that you need to know about the product.

Designed originally back in 2013, Yoko the Yoke has proven to be a highly popular device by the Virtual-Fly team. However, the product has been designed for a range of people including flight sim enthusiasts, cockpit builders, and those in the commercial sector.  

The quality of the build is nothing short of fantastic. There has clearly been a lot of work that has gone into the design and overall finish of the yoke itself. It was sheer joy to hold and use. It is extremely ergonomical for a variety of hand sizes, meaning everything feels comfortable and well placed. The smooth grip and finger placement on the yoke felt very natural and offered a good sense of comfort for those extended play periods.

Overall, the unit itself is quite large, compared to other yoke system. In terms of width, Yoko the Yoke measures in at 303mm, with a height of 185mm. In terms of length, in a natural position, it measures in at 447mm. However, once you fully extend it, you’ll have a product that is 591mm in length. It closely resembles a yoke you would find in an actual cockpit. As for weight, the product is a sturdy 9 kilograms – most of which because  90% of the material is metallic. The materials used certainly gives the yoke a nice overall finish – one that is missing from other high-end yoke sets that I have tried. One thing I really loved for desk-users is how the box housing itself is the perfect dimension for a regular keyboard, allowing me to still use it for other sim-related tasks. Did I keep the yoke on my desk for day-to-day use? No, but installing / removing is a very simple task. My small desk doesn’t really suit housing large units on a regular basis for other tasks I do on my desktop (writing for example), but it’s relatively easy to clamp back together.


One of my favourite elements about the Fly-Virtual Yoko the Yoke is how it really is a ‘plug and play’ type of product. The USB cable goes from the yoke into your PC and a few moments later, the drivers are installed automatically via the hardware and you’re good to go. There’s no need for any type of power cable, as it’s supplied via the USB cable. When it comes to mounting to your personal desk or cockpit, you simply place it where you need it and use the included clamp to bolt it down. The clamp simply slides into place under the yoke and you can adjust the height of it with the large screw. The rubber base protects it from marking your desk. The process is simply reversed should you wish to remove the product. In less than 5 minutes I had unpackaged the product, clamped it on and had the sim ready to fly.

Because of the sheer size and weight of the product, pulling back full force on the yoke did cause me to almost flip my desk over. Not so much the fault of the product as it is with my light and tiny desk, but I imagine I’m not the only one out there which may experience this issue. The amount of force felt right, but once I reached a certain point of ‘pull-back’, the gravity of the desk was now out of balance meaning the desk wanted to come with me and the yoke. I suppose some may say this would bring the immersion closer to me, but when a hot drink subsequently went flying instead, I figured I needed to be a lot more cautious. Whilst it sounds like a design flaw, the product has been built with the weight in mind. The force required to pull back the elevator has been designed upon feedback from pilots and experience from the team to give you that feeling of resistance found in an aircraft.

Just like any new controller, I had to adjust a few in-sim flight controls. Regardless of which simulator you use (FSX, P3D or X-Plane), configuring the controller was pretty simple. As you would expect, simply open up the in-sim menu for controller options and adjust accordingly. The physical hardware is locked, meaning you won’t be able to adjust any of the settings on the yoke itself. For example, if you wanted to adjust the angles, tension or height of the yoke for your set-up or physical size.

One of the few complaints I have about the yoke is the limited number of control inputs found on Yoko the Yoke. There are two ‘click-switches’ on either side, which are designed to assist with trimming both the elevator and aileron trim. There’s also buttons for autopilot controls, or whatever you may wish to assign them to. Perhaps not the most realistic, but from a user point of view, a hat switch and a couple of other ‘pushsable’ buttons on the thumb pad would be really helpful. As a simple desk user, I don’t have the luxury of multiple screens or the use of track-IR, so trying to multitask while inputting radio information or checking my fuel was a bit tricky. This is particularly important if you’re using some kind of throttle set along with the yoke.

The physical movement of the yoke is smooth with no stickinesss when applying any sort of pressure. Whether you’re using one hand or two hands to control the yoke, it feels great. The rotation has a maximum of 60 degrees either side. As for the pitch control, as I keep mentioning, the more deflection you apply, the more resistance it builds up giving this nice feeling of actually interreacting with the control surfaces themselves. Regardless of movement, the yoke returns to a neutral position nicely in the centre. There’s no click, sound, or other user-feedback to indicate you’re in a certain position – you simply rely on your gut based on what you see on the screen. This is how a real aircraft would operate. This is the difference between a more casual yoke compared to the Yoko the Yoke, which is geared more towards those wanting a product that replicates the actions and feeling of a yoke inside an actual aircraft.

So how does it feel in the simulator? Having used it in both Prepar3D V4 and X-Plane 11, I can safely say that the yoke adds a new level of immersion regardless of your platform of choice. I primarily used the yoke during our recent Low ‘N Slow event, which saw us fly for around 2 hours straight through the Rocky Mountains. It was incredibly satisfying to hand-fly with a realistic feeling control input. The input movements you do in real life are nicely reflected visually as well within the simulator. The hand grips are comfortable even during long-flying sessions. What is impressive is how the slightest of touches are picked up by the yoke. A slight push to the left and your aircraft banks accordingly. Push forward so slightly and you’ll see the nose dip. The sensitivity can be adjusted, but it’s great to see that actual device itself can react to those small inputs. Similarly, the amount of force you need for more aggressive movements feels extremely rewarding when you pull off that challenging landing.

Virtual-Fly is known for their excellent support and product warranty. Whilst I had no issues myself, I know that they have a team of dedicated people ready to respond within 12 hours or less to any issues. Furthermore, each product from the Virtual-Fly team comes with a 2-year warranty. That sort of commitment should be a good indication of how much trust they have in their build quality. For those that need extra help setting up, there’s also the ability to call upon remote aid. All of that is included in the price of the product.

Your mileage will certainly vary in terms of price. For users looking for a good yoke, they may find the price to be outside of their usual budget. It’s an expensive piece of kit. For home cockpit builders or professionals, it’s a top-tier yoke that will satisfy the needs of a serious simmer. The ergonomics, resistance and polish of the product will certainly make it one of the most most-used pieces in your custom build. The overall score for value is a hard one to get right due to the variation in the target audience. For desktop users looking for a well-made yoke, the value score would sit nicely at a 6. For cockpit builders or others looking to build a realistic simulator, the value score would be 9 due to the difference in what else is available on the market. The score below of 7.5 is an average of this.

Yoko the Yoke from Virtual-Fly is an excellent, well-built and stable product. The freedom of movement in the controls and ergonomics of the surfaces are all of a premium price tag. It’s that premium price tag which may put people off. Beyond the cost, it’s a great product which does the type of product justice. A few niggles here and there, but you will be getting a product that does exactly what it says it will do very well.


Read More